首页 -> 售后服务 -> LED知识百科
售后服务
联系客服

客服邮箱:

307553001@qq.com

客服电话:13713974897
销售热线:13692105755

 

LED显示屏控制计算机自动开关机BIOS设置
【时间】2015-12-22 10:41:00   【来源】金迈光电   【浏览】

LED显示屏控制计算机自动开关机BIOS设置



1.    
The
first step, when computer is starting, and then click ”Delete” button to enter
the BIOS setup.



首先在启动计算机时,按“Delete”键进入BIOS界面。



2.    
As
soon as the BIOS dialogues appear in the main page of BIOS setup select “Power
Management”, and you’ll see the sub-menu
BIOS设置主界面中选择“Power Management Setup”菜单,进入电源管理窗口。



3.    
In
default condition
,“At the option of Automatic Power Up, some computer is set Resume by
Alarm(
定时开机,有些机器选项为Resume By Alarm)The option is disabled. Move your cursor to
this option, and press “PageUp” or “PageDown” to switch Disable or Enable. Then
set the time and date for auto boot at option of Date (of month) Alarm” and “Time(hh:mm:ss)
Alarm”
选项是关闭的,将光标移到该项,用PageUpPageDown翻页键将“Disabled”改为“Enabled”,而后在“Date (of Month) Alarm”和“Time (hh:mm:ss) Alarm”中分别设定开机的日期和时间。



4.    
If the
“Date” is set as 0, then it will automatically boot  at a certain time every day. After you finish
this setup, press “ESC” to get back at BIOS setup main page, click”Save and
Exit setup”, and press “Y” to save the CMOS setup and exit. Then the computer
will reboot, and setup is done.
如果“Date”设为0,则默认为每天定时开机。设置好后按“ESC”键回到BIOS设置主界面,点击“Save Exit Setup”,按“Y”键保存CMOS设置退出,接着机器会重新启动,这时便大功告成了。



5.    
Of
course, the important point is that it requires the Mother board of your
computer’s compatibility/support. But most of the motherboards can support this
function. Furthermore, the setup will be more or less different from this
instruction, but almost the same.



6.    
当然,值得注意的是定时开机需要您的主板支持才行,不过现在大多数主板都有这项功能。另外,不同的主板在设置上会不尽相同,不过都大同小异



 

分享到: